[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[orca-users:03220] IDE?MO??



????? ?? ??????

???????????????????
IDE?MO?????????????????????

?????????(hdb)??ATAPI?MO(640MB)
???????????????????
????????????????

MOUNT????
mount /mo?
?mount: ???????? /mo ????????
mount /dev/sda?
?mount: ???????? /mo ????????
????????????

????????????????????
???????????

[lilo.conf]???
image=/vmlinuz
label=Linux
read-only
append="hdb=ide-scsi"
[fstab]???
/dev/sda /mo vfat user,rw 0 0

??[dmesg]??????

Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
On node 0 totalpages: 229376
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=Linux ro root=302 hdb=ide-scsi
ide_setup: hdb=ide-scsi
Initializing CPU#0
Detected 2813.580 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 5609.88 BogoMIPS
Memory: 904876k/917504k available (1329k kernel code, 12240k reserved, 668k data
, 96k init, 0k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfa4c0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0
PCI: Found IRQ 9 for device 00:1f.1
PCI: Sharing IRQ 9 with 00:02.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller on PCI bus 00 dev f9
PCI: Found IRQ 9 for device 00:1f.1
PCI: Sharing IRQ 9 with 00:02.0
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L060AVV207-0, ATA DISK drive
hdb: FUJITSU MCM3064AP, ATAPI OPTICAL drive
hdc: _NEC DV-5800B, ATAPI CD/DVD-ROM drive
hdd: CD-RW 48X24, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c03368c4, I/O limit 4095Mb (mask 0xffffffff)
hda: 120103200 sectors (61493 MB) w/1821KiB Cache, CHS=7476/255/63, UDMA(100)
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Partition check:
hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 ????????
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 96k freed
Adding Swap: 2097136k swap-space (priority -1)
Real Time Clock Driver v1.10e
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 11 for device 01:00.0
eth0: RealTek RTL8139 Fast Ethernet at 0xa000, 00:07:40:5b:a9:e0, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: Detected an Intel 845G Chipset.
agpgart: detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xd8000000
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: FUJITSU Model: MCM3064AP Rev: 0030
Type: Optical Device ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 446325 512-byte hdwr sectors (229 MB)
sda: Write Protect is off
sda: sda1 sda2 sda3
NTFS driver v1.1.22 [Flags: R/O MODULE]
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1.